How to Make clean Swamp Cooler Pads

How-to-clean-your-mastercool-swamp-cooler-pads

If you have a Mastercool or Aerocool, cleaning your swamp libation pads is something that should exist done on an annual basis. It is best to do this when yous first turn on your swamp cooler for the year. Cleaning your pads is a fairly unproblematic process that tin can make a large difference. If y'all find that your swamp libation is not working too and you haven't cleaned your pads yet, you should consider washing them.

Why Cleaning Your Swamp Cooler Pads is Important

Cleaning your swamp cooler pads is important for a variety of reasons. In New Mexico, we tend to have difficult water, which contains dissolved rock, limestone, or other dissolved minerals similar calcium, magnesium, and sometimes iron. While not unsafe to your health, hard water tin can create issues with your domicile's piping, fixtures, appliances, and of course, your swamp cooler. Over fourth dimension, hard h2o minerals begin to harden and start to build up on your swamp cooler pads. This tin can affect your libation'due south efficiency and even produce a fish-like olfactory property. Cleaning your pads annually helps manage mineral buildup, makes the pads final longer, removes foreign matter (like cottonwood seeds), and improves efficiency. For homeowners that take Mastercool swamp coolers and a water softening system on their home, you should clean the pads annually and replace them every 3-5 years. If yous don't have a water softening organization on your habitation, or a water filter attached to your copper line, your pads will most likely demand to exist replaced every year.

Directions on How to Clean Your Swamp Cooler Pads

Below are step-past-step instructions on how to clean your swamp cooler pads. To help make information technology easier we've created this video to walk y'all through it. Cleaning your pads is something that you can do yourself, but if you don't experience comfortable doing it, phone call your local HVAC practiced. This service is usually included if you take someone come up out and commencement up your swamp cooler at the get-go of the season. Yet, you should e'er inquire to make certain that it's a part of the service.

Equipment You lot Volition Need:

  • Drill or Phillips Screwdriver – you'll need a drill or screwdriver to gain access to the inside of your swamp libation.
  • Protective Glasses – Information technology's always of import to vesture personal protective equipment (PPE). Condom glasses or goggles will help protect your eyes from any unexpected debris.
  • Gloves – This form of PPE protects your hands from things like hot metal (your swamp cooler could be very hot, depending on the fourth dimension of mean solar day) and cuts or scratches.
  • Ladder – You'll need a ladder to access your roof. Exist sure to brand sure that the ladder is on a apartment surface and is secure.
  • Hose – Yous'll demand some kind of hose in order to properly spray down your swamp cooler pads.
  • Flashlight – Y'all may need a flashlight in order to expect within the unit in order to see where the ability outlets are and unplug them.

Step by Pace Instructions

1. Cull a Proficient Twenty-four hour period with Nice Weather

Make sure you lot do this on a overnice day. Don't try to clean your swamp libation pads if information technology's windy or stormy. Secure your ladder and make sure it is placed on a firm, level ground. Visit the American Ladder Found for total instructions on ladder condom.

two. Disconnect the Power to your Swamp Cooler

First, you'll then want to be sure you've asunder the power to swamp libation. Take off the panel on the side of your swamp cooler to gain admission to the power outlet. Unplug the cords to both the pump and the motor. You'll find the receptacles on the within of your unit.

three. Remove the Cooling Pads

The next step is to become the pads out. They are located in the front end part of the cooler with a mesh encompass. You'll need to unscrew the panel in lodge to slide out the front embrace. And so you'll remove the top panel, which volition popular right off after yous've removed the front mesh covering.

Once the pads are exposed, remove the water distribution tube section laying on top of the pads. This isn't connected to annihilation, so just choice it up and fix it off to the side. Be sure to put items in a safety place, peculiarly if you're on a slanted roof.

At this point, the pads will hands slide on out and you may have several sections of pads depending on your cooler.

4. Check the Pads Condition

In one case the pads are out, exist sure to check their condition. Are they falling apart? Are they super heavy? If the answer is "yes" to either of these questions, then they probably accept a lot of hard water build-up and need to be replaced.

Later on you inspect the pads, safely send them from the roof to the footing so you lot tin wash them.

5. Cleaning the Cooling Pads

In one case you've moved the pads off the roof, shake them out like a rug. This is a simple way to get rid of some of the loose foreign matter within your pads.

Earlier washing, look at the side of each pad and look for instructions that will indicate which side is the forepart and dorsum.

You'll and then begin by backwashing the pads (start from the back and become to the front). Grab your hose and tilt the pad at a downwards bending. You'll see slanted grooves on the sides that volition show you the pathways within each pad. This allows y'all to force the debris through the pad.

Get ahead and begin washing each pad thoroughly. If you are cleaning your pads and the calcium isn't coming off easily, you lot probably need new ones.

Once the pads are cleaned, carefully transport them back upwards the ladder to the roof.

vi. Identify Pads Back in Swamp Libation

Identify the pads dorsum in their place. Be sure to look at the pads and put them in correctly. Once you've replaced them and so you can put the distribution tube department dorsum on acme of the pads.

Set the top metal panel back in place and and then put the mesh console back in front and screw the panels back together.

7. Plug information technology all back In

Plug both the swamp cooler motor and the pump back in. Identify the metal panel covering back in identify and screw information technology in.

And you're washed! Piece of cake-peasy, correct?!

If you'd rather have a professional come out to clean your swamp cooler pads, give TLC a call. Our experienced technicians are comfortable climing up on top of your roof and cleaning or replacing the pads for you.

Keanu-Alaniz-TLC-HVAC-Manager

Keanu Alaniz

Keanu has been with TLC for half dozen years and is a licensed HVAC technician. He has experience repairing and replacing furnace and air conditioning units.